Kramit RV3

NSR · Message par **NSR** » 22 juil. 2014 12:55

I have started a rebuild on my 1988 RV3. It was imported into Australia from Japan in 2007 and has been used on a farm from then. The motor needs a rebuild. I have a conrod but will need to locate a piston for the LC motor.

gitane-mais · Message par **gitane-mais** » 23 juil. 2014 13:23

What a nice bike with an history.

You can find Rotax information here :

http://www.amicale-portal.fr/doc._manue ... tech..html

For the piston, I cannot give you an address, but you should find easily, there are many retailers.
The ardent supporters of the Rotax will inform you.

rx80-heiza · Message par **rx80-heiza** » 23 juil. 2014 13:44

Hi and welcome in the Kram-It family, if you need any informaition or help for some spare parts just contact me.

Herzlich willkommen in der Kram-It Familie, wenn ich dir mit Ersatzteilen oder Bildmaterial helfen kann schreib mir einfach ne Nachricht.

NSR · Message par **NSR** » 03 nov. 2014 13:10

I have started the rebuild on the RV3. I have some questions.
I believe the standard gearing is 15-46. Is this the right gearing for racing?

I will need a new rear sprocket, does any other bike use the same sprocket?

Is the Air box one piece and is this close to the right air filter?

Cheers
Noel

NSR · Message par **NSR** » 18 nov. 2014 12:05

Something has gone very wrong in the gearbox. From what I can make out it was fixed without buying any new parts :mick I have three new shift forks on the way.

NSR · Message par **NSR** » 18 nov. 2014 12:11

The forks and shock have never been serviced. What is a good setup for these forks?

gedeon34 · Message par **gedeon34** » 18 nov. 2014 13:08

NSR a écrit :Something has gone very wrong in the gearbox. From what I can make out it was fixed without buying any new parts :mick I have three new shift forks on the way.

[img_citation]http://i712.photobucket.com/albums/ww12 ... G_1826.jpg[/img_citation]

[img_citation]http://i712.photobucket.com/albums/ww12 ... G_1829.jpg[/img_citation]

Bigre ! des dégats :quoi:

Et avez vous de quoi remplacer les carters ?

Gosh! Damages :quoi:

And have you of what to replace crankcases?

NSR · Message par **NSR** » 18 nov. 2014 13:33

It only broken where the kick start spring is. So it is being welded.

gedeon34 · Message par **gedeon34** » 18 nov. 2014 18:30

ok

fine , good continuation

NSR · Message par **NSR** » 24 déc. 2014 12:59

Have the frame back from the painter, so I can now start putting it together.

Wheels are done.

Linkage bearings where all in good condition.

NSR · Message par **NSR** » 24 déc. 2014 13:06

I have had to clear some of the bush near my house, so in went the pipe to burn out the oil.

gitane-mais · Message par **gitane-mais** » 25 déc. 2014 14:24

They are enormous the bushes at your home :hein: :hein: :hein:
Remark, you've got to do things properly to make leather a pipe :clin:

NSR · Message par **NSR** » 27 déc. 2014 13:53

They are enormous the bushes at your home

Yes I do

This is my back yard.
http://youtu.be/4h6BbasT16I

gitane-mais · Message par **gitane-mais** » 27 déc. 2014 14:17

TOP, your garden is big as well as a municipal territory in France.
A real pleasure to look. THANK YOU

[yt code=4h6BbasT16I&feature=youtu.be]

boulland · Message par **boulland** » 28 déc. 2014 10:33

If you are looking for a rear light, for that mudguard, they are the same than the KTM for the 80's.

I have bought one, and it fit perfectly to the bike.