Aprilia RX 250 ´83

1970>1985 CROSS ENDURO TRIAL

Modérateur : THIERRY

Répondre
ARMIN S
Squadriste Confirmé
Messages : 133
Enregistré le : 27 déc. 2009 23:05
Localisation : Germany

Message par ARMIN S »

Hello,
I want to show some pictures (when I find some) and talk a little bit about
the RX 250´s. In Germany they will be very rare, so
I know there will be just 5 Bikes sold from the 1983-model!!!
Who knows how much it will be in France?
I bought my bike as new in 1986, a local dealer has it in his
showroom for more than 2 years, and I am very proud in this time about
my new bike!
This is now a picture from holiday in Italy, Lago di Lecco, I think it would be
in spring 1987 (inspired by a picture in Germany´s "Motorrad", they made
it in the same place but with another bike):

Image
Avatar du membre
THIERRY
Site Admin
Messages : 26982
Enregistré le : 18 oct. 2008 23:07
Contact :

Message par THIERRY »

It's The LAGO Of COMO ou Lac de Côme ARMIN! ;)
I think they are also rare in France , but it was sold more than 5 models here for sure. They are difficult to find in good condition because a lot of them were used as modern enduro bikes without maintenance.... :cool:
ARMIN S
Squadriste Confirmé
Messages : 133
Enregistré le : 27 déc. 2009 23:05
Localisation : Germany

Message par ARMIN S »

It's The LAGO Of COMO ou Lac de Côme ARMIN!

You are right! It´s a long time ago, and I do not remember
to anything... :rolleyes:
For this pictures I do just remember that they might be
from the Lago di Garda and to this time (in 1988 or ´89)
it was possible to ride there in the mountains around and on
the legendary Passo di TREMALZO! Today this is not more allowed, but
it was a very great fun in the mountains around the Lago!

Image

Image
ARMIN S
Squadriste Confirmé
Messages : 133
Enregistré le : 27 déc. 2009 23:05
Localisation : Germany

Message par ARMIN S »

This will be pictures from the beautiful Motocross-track
in Mothern (France) near the border to Germany (Karlsruhe)
I ride the Aprilia there for two times in 1988, and this will
be the only rides on a real MX-track...
The last picture is from 2005 (not with the Aprilia!!), but it´s
again in Mothern, and you can see that the trees are growing
(and the jumps also) :lol:

Image
Image
Image
Image
Image
hurricane
Squadriste Expert
Messages : 235
Enregistré le : 01 mars 2009 08:57

Message par hurricane »

Et voilà notre ami Armin avec sa belle Aprilia ;) ;)

Image
Avatar du membre
THIERRY
Site Admin
Messages : 26982
Enregistré le : 18 oct. 2008 23:07
Contact :

Message par THIERRY »

Belle moto et Beau Maillot! ;)
coco48
Squadriste
Messages : 33
Enregistré le : 24 mars 2010 17:29

Message par coco48 »

joli moto, la on peu voir que la marque n'a pas changer, preuve a l'apui, j'ai une rx de 2004 (une 50)et elle est génial :P :cool:
bonjour
ARMIN S
Squadriste Confirmé
Messages : 133
Enregistré le : 27 déc. 2009 23:05
Localisation : Germany

Message par ARMIN S »

Here are two pictures from last weekend in Schweyen (F).
First is from the roll-out for checking the bike (first ride after rebuilding).
Bike is working well, but after riding years on modern MX-bikes I got to
learn to ride with a old one... :rolleyes:

Image

Image
Avatar du membre
THIERRY
Site Admin
Messages : 26982
Enregistré le : 18 oct. 2008 23:07
Contact :

Message par THIERRY »

Nice pictures Armin, riding sensations are so different? because of the weight or the supension? the APRILIA is quite a modern bike ( APS+ROTAX Water Cooled, disk brake)...
ARMIN S
Squadriste Confirmé
Messages : 133
Enregistré le : 27 déc. 2009 23:05
Localisation : Germany

Message par ARMIN S »

There are three main differences to my modern bike:
1. The seat is too short and the tank too high, so it is not really possible
to put the weight up to the front end. So this is not so good for high
speed in the corners.
2. The clutch feels very different to my KTM-hydraulic clutch system,
I have to use all four fingers to use the Aprilia-clutch.
3. The rear drum brake is way different to a disc brake. First I thougt
I got no rear brake, after a little bit riding I feel a little braking effect.
But no way for brake-sliding into corners or something...
In the picture you can see that I really want to use the brake :)

Image
ARMIN S
Squadriste Confirmé
Messages : 133
Enregistré le : 27 déc. 2009 23:05
Localisation : Germany

Message par ARMIN S »

Last weekend I would be part of a nice meeting with other guys
in Germany (Bechthal). It´s just for fun, riding and talking... :)
And looking for nice bikes from different brands. There are SWM,
Maico, Fantic, Aprilia, Cagiva.......

Image
Image

Click for more: http://crosso.vs120043.hl-users.com/Kla ... 2.06.2010/
Click to "events 2009/10" and then to "Klassik-Treffen Bechthal"
The Pics above are taken by this site...
Modifié en dernier par ARMIN S le 15 juin 2010 21:05, modifié 1 fois.
Avatar du membre
THIERRY
Site Admin
Messages : 26982
Enregistré le : 18 oct. 2008 23:07
Contact :

Message par THIERRY »

Nice pictures, nice bikes ARMIN airways... ;)
ARMIN S
Squadriste Confirmé
Messages : 133
Enregistré le : 27 déc. 2009 23:05
Localisation : Germany

Message par ARMIN S »

Today I will make a clutch modification because it is too hard
to pull the clutch lever....
Now I got the last evolution from Rotax to the clutch system.
I hope it will have some positive effect :)
First the old clutch plate:

Image

Then the old and the new side by side:

Image

Here the clutch balls and lever:

Image
Image

Last test if anything will fit before remount:

Image
Avatar du membre
THIERRY
Site Admin
Messages : 26982
Enregistré le : 18 oct. 2008 23:07
Contact :

Message par THIERRY »

I think it should work. I tought that you already got it, with the 250 Water Cooled engine. It was maybe a upgrade on the 84 models..
Test it and give us some news Armin! ;)
ARMIN S
Squadriste Confirmé
Messages : 133
Enregistré le : 27 déc. 2009 23:05
Localisation : Germany

Message par ARMIN S »

Before the version I have now there was another clutch
version. Here is a link where you can see the clutch evolution:

http://www.dagraracing.com/index.php?op ... &Itemid=28
Répondre